Instructions for Trinkets Trunk:
1. Spray #19000 Plasti-Kote White Sandable Primer to seal the porous surface of
the trunk. Let dry 1 hour. Sand the surface smooth with 600 grit
sandpaper.
2. Spray 3-4 coats of gold Base Coat, drying 1/2 hour between Base Coat applications.
Let thoroughly dry 1-2 hours before applying Top Coat.
3. Mask off edges with tape.
4. Completely cover the Base Coat with one heavy coat of black Top Coat - for
a larger crackled pattern, continue spraying 2-3 additional coats
while the first coat is still wet; 1-2 Top Coats for finer Cracklin'
Finish. For best results Top Coat should be applied evenly, while
holding the can approximately 4 " from the surface. Allow to dry
for several hours.
5. If a clear protective coat is desired as a final finish,
use Plasti-Kote Clear Kote #11429.
6. Attach metal embellishments to the center front.
7. Line interior with fabric.
Instructions for Fragrance Bottles:
1. Spray #19000 Plast-Kote White Sandable Primer to prepare the
surface of the bottles and the stopper. Let dry 1 hour.Sand the
surface smooth with 600 grit sandpaper.
2. Spray 3-4 coats of Base Coat, drying 1/2 hour between Base Coat applications.
Let thoroughly dry 1 hour before applying Top Coat.
3. Completely cover the Base Coat on the bottles with one heavy coat of Top Coat
- for a larger Cracklin' Finish, continue spraying 2-3 additional
coats while the first coat is still wet; 1-2 Top Coats for finer
Cracklin' Finish. For best results, the Top Coat should be applied
evenly, while holding the can approximately 6" from the surface.
Let dry several hours.
4. If a clear protective coat is desired as a final finish,
use Plasti-Kote Clear Kote #11429.
5. Attach gold tassel and braid to the top of bottle and embellishment to front.
Hint:
For Top Coat - the closer you hold the paint
can while spraying the object, and the heavier the Top Coat is
applied, the larger the crackled pattern will appear. For smaller
cracks - hold can a little further from object and spray only
one, heavy coat. For best results spray 3 or 4 coats of the Base
Coat before applying Top Coat. |